|
Bridge power supply
|
DC5 V±0.25 V within 60 mA (Changeable toDC2.5 V )
|
Input range
|
F.S. setting is available at the input range from ±0.4 mV/V to ±3.1 mV/V
(When bridge power supply is DC5 V)
|
Output range
|
DC±10 V Load resistance 5 kΩ or more
(F.S. setting is available in Function.)
|
Output times
|
Changeable to 4 times/s, 20 times/s, 50 times/s or 100 times/s.
(Synchronous with display rate.)
|
Output resolution
|
Approx. 1/12 000
|
Zero adjustment range
|
±2.4 mV/V
|
Non-linearity
|
Display 0.01 %F.S.
Output 0.05 %F.S.
|
Input noise
|
±0.6 μVp-p or less
(With a default setting of digital filter and stabilized filter)
|
Input filter
|
2 Hz (Changeable to 10 Hz, 100 Hz or 2 kHz)
|
A/D sampling
|
100 times/s
|
CHECK
|
Approx. 0.3 mV/V (Setting with the interval of about 0.1 mV/V is available in the range fromapprox.0.1 mV/V to 1.5 mV/V.)
|
Load display
|
7 segment red LED with 17 mm character’s height
|
Display range
|
-99 999 ~ 99 999
|
Display times
|
4 times/s (Changeable to 20 times/s, 50 times/s or 100 times/s)
|
External control function
|
ZERO, PEAK/TRACK/A/Z, HOLD, RESET/A/Z OFF, SEL1, SEL2
|
Comparator function
|
|
Set value
|
-99 999 ~ 99 999
|
Set quantity
|
3 points of S0, S1 and S2
*"S0" is set by function command.
|
Comparator conversion rate
|
Changeable to 4 times/s, 20 times/s, 50 times/s or 100 times/s (Syncronous with display times)
*During the display of set value, process of measurement and also process of comparator are interrupted.
|
Various functions
|
Zero tracking, Degital filter, Stabilization filter, Change of HOLD target, Sheet key lock, Selection of Peak mode, Chenge of analog output target.
|
Operating temp. /humidity range
|
Temperature -10 ℃ ~ 50 ℃,
Humidity 85 %RH or less(Non condensing)
|
Power supply voltage
|
AC100 V ~ AC240 V 50/60 Hz
(permissible variable range from AC85 V to AC264 V)
|
Power consumption
|
Approx. 9 VA (without options, at AC100 V)
Approx.18 VA at maximum (with options, at AC100 V ~ 240 V)
|
Outline dimensions
|
(W)96 mm x (H)96 mm x (D)129.5 mm (excludes protruding parts)
|
Weight
|
Approx. 500 g (without options)
|
Protection code
|
IP65 (Only for the fron panel when the attached panel mounting gascket is installed.
|