帮我筛选一下液下渣浆泵叶轮A唐县液下渣浆泵叶轮

?有过液下渣浆泵使用经验的人们都知道，在使用的时候最常出现的一个问题就是水泵吸不上水来，在节奏如此快速的工业化生产中，如果一旦渣浆泵罢工了的话，势必会产生重要的影响。那么当它不吸水的时候，可以从以下几个方面来进行问题的排查。

一、产品概述SP液下渣浆泵为立式离心液下渣浆泵，浸入液下，用于输送磨蚀性、粗颗粒、高浓度渣浆。不需要任何轴封和轴封水，在吸入量不足的工况下也能正常工作。

SP型液下渣浆泵过流部件由耐磨金属制成。 

根据渣浆池液面的高低，可选择不同长度的泵传动轴或吸入管。 

采用多种速度和多种变型方式，使得泵在最佳工况下运行，使用寿命长，运行效益高，能满足多类恶劣的输送条件。 

Second, SP liquid slurry pump application Range 
Slurry pump is mainly suitable for conveying corrosive, coarse particles, high concentration slag slurry. Widely used in metallurgy, mining, coal, electricity, building materials, environmental protection and other departments.
Third, SP liquid slag slurry pump structure description 
The difference between the slurry pump structure of SPR liquid and the slurry pump under SP liquid is only that the parts of the dipping slag slurry are lined with corrosion-resistant rubber, the parts lined with rubber include shafts, pumps, impellers, protective plates and filters, and the connecting bolts in the lower part of the immersion liquid are equipped with rubber protective sleeves, and the transmission parts and SP pumps
SP Liquid slurry pump pump body, impeller guard plate are made of wear-resistant materials. The pump end of the bearing body adopts a double row tapered roller bearing, and the driving end adopts a single row cylindrical roller bearing, which can withstand the maximum axial load of the pump. The bearing body is fitted with a motor seat or motor bracket, which can be driven by a direct or triangle belt drive. The pump should be immersed in the slurry pool to work, the pump body suction inlet with a filter, can prevent large particles into the human pump. Jdhuiquan5.15
Four, the depth of the liquid can be extended pump self-belt liquid depth of about 70cm, according to customer requirements to increase the depth of the liquid, (the price with the addition of a long number of meters and different) please customers and customer service personnel in advance to explain.

帮我筛选一下液下渣浆泵叶轮A唐县液下渣浆泵叶轮

单吸悬臂式结构，用轴承体，固定盘，连接管连接泵的水力部件，液体由出水管部件排出，泵的叶轮为半开式叶轮，在叶轮叶片进口延伸处设有搅拌叶片，该泵主要特点是液下部位的泵轴有足够的刚度，叶轮，泵体之间不设轴承，不采用轴封，可以输送含有较大浓度固体颗粒的介质。立式液下渣浆泵主要用于环保，新型建材，洗煤，市政工程，火力发电，煤气焦化厂，炼油厂，炼钢厂，采矿，造纸业，水泥厂，食品厂，加汽混凝土。液下渣浆泵为单级印染等行业抽吸浓液，稠油，油渣，污浊液，泥浆，灰浆，流砂及城市排污沟道的流动污泥，以及含有煤块，灰渣的液体。也可作为化工，医药等行业抽吸含有泥砂渣物的流体和有腐蚀性液体。???。

五、型号意义

    40 PV-SP

   40----------吐出口径40mm

   PV--------- PV型轴承组件

   SP----------液下泵

水泵安装

 泵安装的好坏对泵的运行和寿命冇重要影响，所以安装和校正必须仔细进行。泵的外形及安装尺寸。