商铺名称:河北会泉泵业有限公司
联系人:徐经理(先生)
联系手机:
固定电话:
企业邮箱:1815991877@qq.com
联系地址:河北省石家庄市桥西
邮编:5000
联系我时,请说是在汽配名企网上看到的,谢谢!
我要找液下渣浆泵厂家A峰峰矿液下渣浆泵厂家
3,调查泵的安装基础是不是现已稳固,一切各部件螺栓是不是拧紧,4,中止作业时,应先中止电动机,然后闭上压力表旋塞,5,泵长期中止运行时,应将泵拆开,擦洗干净,涂上防锈油妥善保留,6,起动电机,翻开压力表旋塞,当泵以全转数作业时,调节闸阀开度到需要规模。
一、产品概述SP液下渣浆泵为立式离心液下渣浆泵,浸入液下,用于输送磨蚀性、粗颗粒、高浓度渣浆。不需要任何轴封和轴封水,在吸入量不足的工况下也能正常工作。
SP型液下渣浆泵过流部件由耐磨金属制成。
根据渣浆池液面的高低,可选择不同长度的泵传动轴或吸入管。
采用多种速度和多种变型方式,使得泵在最佳工况下运行,使用寿命长,运行效益高,能满足多类恶劣的输送条件。
Second, SP liquid slurry pump application Range
Slurry pump is mainly suitable for conveying corrosive, coarse particles, high concentration slag slurry. Widely used in metallurgy, mining, coal, electricity, building materials, environmental protection and other departments.
Third, SP liquid slag slurry pump structure description
The difference between the slurry pump structure of SPR liquid and the slurry pump under SP liquid is only that the parts of the dipping slag slurry are lined with corrosion-resistant rubber, the parts lined with rubber include shafts, pumps, impellers, protective plates and filters, and the connecting bolts in the lower part of the immersion liquid are equipped with rubber protective sleeves, and the transmission parts and SP pumps
SP Liquid slurry pump pump body, impeller guard plate are made of wear-resistant materials. The pump end of the bearing body adopts a double row tapered roller bearing, and the driving end adopts a single row cylindrical roller bearing, which can withstand the maximum axial load of the pump. The bearing body is fitted with a motor seat or motor bracket, which can be driven by a direct or triangle belt drive. The pump should be immersed in the slurry pool to work, the pump body suction inlet with a filter, can prevent large particles into the human pump. Jdhuiquan5.15
Four, the depth of the liquid can be extended pump self-belt liquid depth of about 70cm, according to customer requirements to increase the depth of the liquid, (the price with the addition of a long number of meters and different) please customers and customer service personnel in advance to explain.
我要找液下渣浆泵厂家A峰峰矿液下渣浆泵厂家
对于渣浆泵相信大家是有所了解的,在使用的时候可能需要排油,下面就为大家介绍渣浆泵的排油步骤:1,如果要把渣浆泵箱体中的油全部排掉,可以拧下箱体下部的放油塞,将油排掉。2,渣浆泵在外排油的情况下,液面距离油箱顶板高度不要超过30毫米,以保证泵内各轴承的润滑和冷却,当千斤顶工作腔容积过大时,需另设付油箱,保证外排油后的液面最低高度不小于100毫米以免吸空。
五、型号意义
40 PV-SP
40----------吐出口径40mm
PV--------- PV型轴承组件
SP----------液下泵
水泵安装
泵安装的好坏对泵的运行和寿命冇重要影响,所以安装和校正必须仔细进行。泵的外形及安装尺寸。