| 详细介绍：
HI9835意大利哈纳HANNA HI9835便携式电导率仪Conductivity meter
|
＊多参数，可同时测量电导、总固体溶解度、氯化纳及温度
＊4线铂金材质的探头，可测量温度及浓度范围更大，稳定性更强；
＊自动识别量程，方便操作，应用于农业、环境水、食品等众多领域，并有效测量海水和氯化钠含量超过130%溶液中的NaCl含量。不仅可在实验室使用，也可在野外测量。（电源用4节1.5VAA电池供电）
＊TDS常数0.40 to 0.80；温度系数0.00 to 6.00%；重现性更好；
＊防水机身、机身坚固、不仅可在实验室使用，也适用野外测量；
＊可与12VCD电源连接
＊带自动关机功能。
|
|
型 号
|
HI9835
|
|
测量范围
|
EC： 0.00 to 29.99μS/cm；30.0 to 299.9μS/cm；300 to 2999μS/cm；
3.00 to 29.99mS/cm；30.0 to 200.0 mS/cm Up to 500.0mS/cm
(不使用温度补偿功能时实际的电导值)
TDS： 0.00 to 14.99ppm、15.0 to 149.9ppm、150 to 1499ppm、
1.50 to 4.99ppt、15.0 to 100.0ppt；Up to 400.0ppt
(不使用温度补偿功能时实际的TDS值，转换系数0.80)
NaCl：0.0 to 400.0%
温度：0.0 to 60.0℃
|
|
精 确 度
|
EC：读数的±1%±(0.05μS/cm或者1字中的较大者)
TDS：读数的±1%±(0.03ppm或者1字中的较大者)
NaCl：读数的±1%
温度：±0.4℃
|
|
EC校准
|
在六个校准点中选一与待测值接近点进行校准：
84μS/cm；1413μS/cm；5000μS/cm；12880μS/cm；80000μS/cm；111800μS/cm；
|
|
NaCl校准
|
用HI7037一点校准
|
|
温度校准
|
0℃和50℃两点校准
|
|
温度补偿
|
0 to 60℃手动或自动温度补偿
|
|
温度补偿系数
|
0.00 to 6.00%/℃可调，出厂设置为1.9%/℃
|
|
电 极
|
HI76309四环电导电极
|
|
TDS转换因子
|
0.40 to 0.80可调，正常为0.50
|
|
自动关机
|
停止操作5分钟以后(可取消此功能)
|
|
电 源
|
4×1.5V AA或者12VDC电源
|
|
适用环境
|
0 to 50℃；100%RH
|
|
尺寸/重量
|
196×80×60mm/500g
|
HI9835 Italy HANNA HI9835 Hana portable conductivity meter Conductivity meter
* multi parameter, which can simultaneously measure the conductivity, TDS, sodium chloride and temperature
* probe 4 line platinum material, can measure the temperature and the concentration range is bigger,stronger stability;
* automatic recognition range, convenient operation,used in agriculture, water, food and other fields, andeffective measurement of water and sodium chloridecontent of more than 130% NaCl content in solution.Not only can be used in the laboratory, but also in thefield measurement. (power supply with 4 1.5VAA batteries)
* TDS constants of 0.40 to 0.80; 0 to 6% temperature coefficient of reproducibility is better;
* waterproof body, strong body, can not only be used in laboratory, also suitable for field measurement;
* can be connected with 12VCD power supply
* with automatic shutdown function.
Technical index
Type HI9835
The measurement range of EC: 0 to 29.99 S/cm; 30 to299.9 S/cm 300 to 2999 μ S/cm
3 to 29.99mS/cm 30 to 200; mS/cm Up to 500.0mS/cm
(do not use temperature compensation function when the actual conductance value)
TDS: 0 to 14.99ppm, 15 to, 150 to 1499ppm149.9ppm,
1.50 to 4.99ppt, 15 to 100.0ppt; Up to 400.0ppt
(do not use temperature compensation function when the actual TDS value, conversion coefficient of 0.80)
NaCl:0.0 to 400%
Temperature: 60 ℃ 0 to
The accuracy of EC: reading ± 1% ± (0.05 μ S/cm or 1 words in the larger)
TDS: reading ± 1% ± (0.03ppm or 1 words in the larger)
NaCl: reading ± 1%
Temperature: 0.4 ℃ ±
EC calibration with the measured values close to onepoint calibration is performed in the six calibration points:
84 μ S/cm; 1413 μ S/cm; 5000 μ S/cm; 12880 μ S/cm; 80000 μ S/cm; 111800 μ
NaCl calibration with the HI7037 single point calibration
The temperature calibration of 0 ℃ and 50 ℃ two-pointcalibration
Temperature compensation of 0 to at 60 ℃ manual orautomatic temperature compensation
Temperature compensation coefficient of 0 to 6.00%/ ℃ adjustable, factory set at 1.9%/ ℃
City of Victoria conductance electrode electrodeHI76309
TDS conversion factor of 0.40 to 0.80 adjustable,normal 0.50
After the automatic shutdown stop 5 minutes (can cancel the function)
The power of 4 × 1.5V AA or 12VDC power supply
Application of 0 to at 50 ℃; 100%RH
Size / weight of 196 * 80 * 60mm/500g
Standard configuration
Optional accessories
HI76309 conductance electrode
上海-浙江-杭州-江苏-南京-无锡-苏州-北京-天津-重庆-沈阳-长春-吉林-哈尔滨-石家庄-唐山-西安-太原-济南-南京-杭州-成都-贵阳-昆明-西藏-拉萨-新疆-乌鲁木齐-内蒙古-呼和浩特-包头-银川-合肥-福州-南昌-武汉-长沙-南宁-海口-河北-秦皇岛-张家口-保定-廊坊-唐山-山东-青岛-淄博-烟台-威海-辽宁省-大连-鞍山-抚顺-丹东-黑龙江-大庆-齐齐哈尔-牡丹江-佳木斯-吉林省-延吉-四平-山西省-大同-长治-晋城-四川-攀枝花-自贡-宜宾-雅安-上海-浙江-杭州-厦门-宁波-昆山-嘉兴-湖州-常州-保定-锦州-湛江-辽宁-云南-陕西-青海-银川-北海-温州-常州-无锡-苏州-南京-镇江-扬州-南通-合肥-徐州-常熟
| 
放大图片
暂无相关下载
