详细介绍:
德图testo330-3烟气分析仪
· testo 330-2 烟气分析仪,包括充电电池和标定证书;测量 O2, CO2, CO (带H2 补偿), 毛/净效率, 抽力/压力
· 自动检漏
· 显示充电电池状态
· 显示传感器状态
· 监测冷凝水收集盒状态,满了以后出现"FULL" 信号
· 显示泵的抽力(l/min.)
· 显示出错信息,包括描述和状态
· 显示上次维护时间
· 显示仪器温度
· 使用时间计时
|
德国德图testo 330-3烟气分析仪额外测量任务:
· ΔT测量
· 环境CO测量
· 环境CO2测量
· 通过气体检漏探头检测气体泄漏情况
· 测量气体压力的ΔP
· 气体/油液流速测量
|
德国德图testo 330-3烟气分析仪自动选择菜单:
|
无需取出探头,即可进行烟气传感器初始化
德国德图testo 330-3烟气分析仪内存管理
· 400组测量数据,带系统编号
· 每个系统编号下可存储多组数据
· 可通过条码笔读取信息
· IRDA接口,用于与PDA/笔记本电脑进行数据传输
· USB接口,用于与PC进行数据传输
· ZIV驱动,用于各种标准软件
德国德图testo 330-3烟气分析仪其他特性
· BImSchV菜单,带手动CO关断功能和qA平均值
· 计算参数:烟气露点
· 显示曲线图
· 以图线形式寻找特殊点
· 内置磁性防撞击保护
· 防护等级: IP40
· 充电电池寿命:运行泵的情况下大于6小时
· 充电电池可单独充电或置于仪器内充
· 可设定环境CO/CO2测量的起始报警值
TÜV认证/ EN标准
O2, CO2, CO, NO, NOlow, °C, hPa精度认证
认证更换CO传感器测量(无需标气调整)
|
Testo testo330-3 flue gas analyzer
Testo 330-2 flue gas analyzer, including charging battery and calibration; measurement of O2, CO2, CO (with H2compensation), net / gross efficiency, suction / pressure
Automatic leak detection
· display battery charge state
· show the sensor state
· monitoring condensed water collecting box, filled with later appears "FULL" signal
· display force pump (l/min.)
· display error information, including the descrtption and state
· show last maintenance time
Temperature display instrument.
Use timer
Germany testo 330-3 extra measurement task of flue gas analyzer:
·Δ T measurement
· CO environment
· CO2 environment
Through the detection of gas leakage, gas leakage detecting probe
Measurement of gas pressure, Δ
· gas / oil flow measurement
Germany testo 330-3 flue gas analyzer automaticselection menu:
The probe type automatic identification of the connected
No need to remove the probe, can smoke sensorinitialization
The initialization, probe can be placed inside the flue
Germany testo 330-3 flue gas analyzer memory management
400 groups of measured data, with the system of numbering
Each system can store multiple sets of data number
· readable information by barcode pen
IRDA interface, used for data transmission and PDA/ notebook computer
USB interface, used for data transmission with PC
ZIV drive, used for a variety of standard software
Germany testo 330-3 other characteristics of flue gas analyzer
BImSchV menu, shut off the function and the mean value of qA with manual CO
· parameters: flue gas dew point
· graph display
· to line form for the special points
Built in magnetic anti-collision protection
· protection grade: IP40
· charging battery life: operation of the pump case is more than 6 hours.
· the rechargeable battery can separate charge or an instrument filled
The alarm value can be set to start, CO/CO2measurement
T Ü V certification / EN standard
O2, CO2, CO, NO, NOlow, C, the accuracy of hPacertification
Replacement of the CO sensor measurement certification(without standard gas adjustment)
|