详细介绍:
德尔格Pac 7000单一气体检测仪
Pac 7000单一气体检测仪详细介绍:
外形小、坚固耐用、符合人体工程学的友好设计、直观、经济实用、功能强大的Pac 7000是为工作场所个人监护而量身定做的产品。这种创新的气体检测器配备了各种功能,并且适合用于日常工业生产环境中各种不同的用途。这种检测器是功能非常优异的工具,具有很高的可靠性,能够快速预警一氧化碳,硫化氢,氧气,二氧化碳,氯气,氢氰酸,二氧化氮,磷化氢和二氧化硫的有害浓度。
德尔格Pac7000是一台用于个人防护的新型单一气体检测报警仪,可以连续检测环境空气中的相关毒气的浓度并及时报警。
此仪器具有如下特点:
外形小巧,坚固耐用
德尔格Pac7000无论从尺寸和重量来说,都非常适用于个人防护。仪器外部有一层橡胶使得仪器更坚固耐用且防护等级为IP65。背面配有的腰带夹可将仪器别在使用者的工作服上。
使用方便
双键式操作面板,使用简单方便,可以通过锁定按键避免误操作。更换锂电池快速简单。通过红外接口和专用软件,可在计算机上对仪器进行配置和标定。
大屏幕显示
大屏幕显示能够实时显示气体浓度值,警告和故障,及仪器的剩余使用时间,且配有明亮的背景光照明。
创新的传感器技术
德尔格新型XXS传感器是电化学检测原理,扩散距离短,反应灵敏迅速。
传感器更换方便。
功能测试模式
仪器配有功能测试模式,当需要通过功能测验检查标定情况时,显示屏上会出现一个警告图标。用户可以调整功能测试周期。功能测试既可以手工完成,也可以通过软件完成。功能测试组件可选配,通过软件Pac Vision或CC Vision,可以激活并进行功能测试。功能测试结果会储存在时间存储器里。
使用时间可调
仪器的使用时间可以调整,例如调整标定周期,检查周期或特殊的“寿命周期”。这些调整可以通过软件Pac Vision或CC Vision完成。
事件存储器
德尔格Pac 7000配有时间存储器,可以储存五天7200个数据。通过软件Pac Vision,CC Vision或Gas Vision可以将储存的数据传输到计算机里,并进行编辑。
报警/警告功能
您不用再为嘈杂或过于明亮的工作环境中时刻注意仪器是否报警而担心了!仪器具有声光及振动报警。报警为双声鸣响,易于识别。另外,仪器寿命将尽时或电池寿命将尽时都会激活报警功能。预报警和主报警是可以选择是否确认或锁定的。
标定和仪器配件
德尔格Pac 7000可以通过红外通讯接口或E-Cal标定组件与计算机连接,通过Pac Vision或CC Vision软件,对仪器进行标定或所有功能的个性化配置,以及传输存储数据。
技术参数
尺寸(长×宽×高): 64×84×20mm
重量:120g
环境条件: 温度:-30~50℃
压力:700~1300 hPa
湿度:10~90% r. h.
防护等级:IP65
显示:显示被测气体种类,仪器寿命,警告和故障功能,实时显示气体浓度值
电池寿命(25℃时,每天工作24小时):
CO:>5500小时
H2S:>5500小时
O2:>2700小时
报警:双声鸣响,>90dB(A),在30cm范围内
认证:CE-Sign:(89/336/EEC,94/9/EC)
ATEX:I/II M 1/1 G EEx ia I/IIC, T4
-30℃ ≤ Ta ≤ +55℃
UL: Class I, II Div 1, Group A, B, C, D, E, F, G, Temp. Code T4
-30℃ ≤ Ta ≤ +55℃
Cul: Class I, II Div 1, Group A, B, C, D, E, F, G, Temp. Code T4
-30℃ ≤ Ta ≤ +55℃
量程及报警值:
测量范围 A1报警浓度值 A2报警浓度值
Pac 7000 CO 0~1999ppm 30ppm 60ppm
Pac 7000 H2S 0~100ppm 10ppm 20ppm
Pac 7000 O2 0~25Vol.% 19 Vol.% 23Vol.%
Pac7000CO2 0-5Vol%
Pac7000CL2 0-20ppm
Pac7000HCN 0-50ppm
Pac7000NH3 0-300ppm
Pac7000NO2 0-50ppm
Pac7000PH3 0-20ppm
Pac7000SO2 0-100ppm
随机提供
Pac 7000 主机(包括电池和传感器),说明书,检测报告,小改锥一个。
可选配件
红外通讯接口,USB连接线和Pac Vision软件
锂电池
水尘过滤膜
真皮便携包
功能测试组件,包含测试气体,5.8升(用户可以自选气体种类)
Delger Pac 7000 single gas detector
Pac 7000 single gas detector in detail:
Small, sturdy and durable, with friendly design,ergonomics, economical and practical, intuitive andpowerful Pac 7000 is tailored to the workplace personalcare products. The innovation of the gas detectorequipped with a variety of functions, and is suitable for a variety of purposes in daily industrial production environment. This detector is very good tool, has the very high reliability, capable of rapid alert carbon monoxide, hydrogen sulfide, carbon dioxide, oxygen,chlorine, hydrocyanic acid, nitrogen dioxide, sulfur dioxide concentration of phosphine and harmful.
Delger Pac7000 is a new type of single gas detection and alarm instrument for personal protection for acontinuous detection, concentration of gas in air and timely alarm.
This instrument has the following characteristics:
Compact, sturdy and durable
Delger Pac7000 from both the size and weight, are verysuitable for personal protection. The exterior of the instrument with a layer of rubber makes the instrumentmore rugged and protection class IP65. The belt is equipped with back clip can make the instrument not on the user's working clothes.
Easy to use
Double bond type operation panel, simple and convenient to use, can lock the keys to avoid misoperation. Quick and easy replacement of lithium battery. Through the infrared interface and special software, the computer on the instrument configuration and calibration.
Large screen display
Large screen display can display the values of gas concentration, warning and fault, and the instrument to use the remaining time, and with the background lightingbright.
Innovative sensor technology
The new XXS sensor Delger is electrochemical detection principle, short diffusion distance, sensitive and rapid reaction.
The sensor is convenient to replace.
Functional test pattern
The instrument is equipped with the function test mode,when the need for calibration through the function test to check, a warning icon will appear on the screen. The user can adjust the function test cycle. Functional testingcan be done manually, but also can be completed through software. Functional test components can be selected by software Pac, Vision or CC Vision, can be activated and perform a function test. Function testresults will be stored in the memory in time.
The use of time is adjustable
Instrument use time can be adjusted, such as adjusting the calibration cycle, cycle or special "life cycle". These adjustments can be accomplished by software Pac Visionor CC Vision.
The event memory
Delger Pac 7000 is equipped with a time memory, can store 7200 data for five days. Through the software PacVision, CC Vision or Gas Vision data can be stored into the computer, and edit.
Alarm and warning function
You don't have to constantly noisy or too bright working environment in the attention that whether alarminstrument! The instrument has the sound and vibrationalarm. The alarm is ringing tone, easy to identify. In addition, instrument life will do or the battery life will dowill activate alarm function. Warning and alarm canchoose whether to confirm or lock.
Calibration and instrument accessories
Delger Pac 7000 can be connected through the infrared communication interface or E-Cal calibration module and the computer, through the Pac Vision or CC Vision software, personalized configuration calibration or all functions of the instrument, as well as the transmission of stored data.
Technical parameters
The size (length * width * height): 64 x 84 x 20mm
Weight: 120g
Environmental conditions: temperature: -30 ℃ ~ 50 ℃
Pressure: 700 ~ 1300 hPa
Humidity: 10 ~ 90% R. H.
Protection grade: IP65
Display: display the measured gas species, equipmentlife, warning and fault function, real-time display gas concentration values
Battery life (25 ℃, 24 hours of work a day):
CO:>5500 hours
H2S:>5500 hours
O2:>2700 hours
Warning: double ring, >90dB (A), in the range of 30cm
Certification: CE-Sign: (89/336/EEC, 94/9/EC)
ATEX:I/II M 1/1 G EEx IA I/IIC, T4
-30 ℃ ≤ Ta ≤ +55 ℃
UL: Class I, II Div 1, Group A, B, C, D, E, F, G, Temp.Code T4
-30 ℃ ≤ Ta ≤ +55 ℃
Cul: Class I, II Div 1, Group A, B, C, D, E, F, G, Temp.Code T4
-30 ℃ ≤ Ta ≤ +55 ℃
The range and the alarm value:
Measuring range of A1 concentration in A2 alarmconcentration alarm
Pac 7000 CO 0 - 1999ppm 30ppm 60ppm
Pac 7000 H2S 0 - 100ppm 10ppm 20ppm
Pac 7000 O2 0 to 25Vol.% 19 Vol.% 23Vol.%
Pac7000CO2 0-5Vol%
Pac7000CL2 0-20ppm
Pac7000HCN 0-50ppm
Pac7000NH3 0-300ppm
Pac7000NO2 0-50ppm
Pac7000PH3 0-20ppm
Pac7000SO2 0-100ppm
The supplied
Pac 7000 host (including batteries and sensors),specifications, test report, a small screwdriver.
Optional accessories
Infrared communication interface, USB cable and PacVision software
Lithium battery
Water dust filter
Leather bag
Functional test components, including test gas, 5.8 liters(users can customize the gas type)
|