Thank you for purchasing our product. Observe the warnings on the machine and manual strictly and properly keep the manual. Do not operate the UPS before read safety notes and operation instructions.

INDEX

Chapter 1 Safety Introduction

1.1 Descrtption of the Symbols

All of the symbols as listed in the table below maybe used in this manual .This symbols are used for reminding users of safety notes for installation, operation ,and maintain.

Symbol & Descrtption
Symbol	Descrtption
	Caution,danger
	Danger electric shock
	Alternating current(AC)
	Direct current(DC)
	Protective ground
	Recycle
	Do not dispose with ordinary trash

1.2 Safety Notes

1.Read this manual carefully and thoroughly before operation the UPS and save this manual properly for reference.

2. When operating,please pay attention to all the alarming marks and operate in required.

3. Avoid direct sunlight, rain, or in a wet environment to use this equipment

4.This UPS can not be installed near the heat source area, or an electric heater, furnace and other similar equipment .

5.When placing UPS,leave a distance around to ensure ventilation. When installing,please refer to the instructions

6.Wipe with dry goods when cleaning.

7. In the event of fire occurring in the vicinity, please use dry powder fire extinguishers. The use of liquid fire extinguishing agents cause electric shock.

1.3 Electric safety

1. Before power, make sure is properly grounded, and check the wiring and the battery polarity is connected correctly

2. When the UPS need to move or re-wiring, disconnect the AC input power and to ensure that UPS is completely shut down, otherwise the output may still be charged, and there is the risk of electric shock

3. Please use our attachments and accessories specified.

4. To comply with EMC requirements, UPS's output line length should be within 10 meters

1.4 Battery safety

1. Battery life shorten with arising ambient temperature. Replace battery regularly can ensure it works and to ensure adequate back-up time.

2. Battery maintenance only be operated by professional personel who have barrtey knowledge.

3. There is risk of electric shock and short circuit the battery current danger. To avoid electric shock injury accident in the replacement battery, please observe the following warning:

A. Do not wear watches, rings or similar metal objects

B. Use insulated tools

C.Wear rubber boots and gloves

D. Do not put metal tools or similar metal parts on the battery

E. Before the separation of the battery connection terminals,you must first disconnect the load on the battery.

4.. Do not expose of batteriy to the fire, they may explode.and endanger safety

5. Non-professionals do not open or mutilate the battery, because batteries contains electrolyte acid and other hazardous substances, which will cause skin and eye damage. If you accidentally come into contact with the electrolyte, wash with plenty of water immediately and go to the hospital

6. Do not short the positive and negative of the battery electrode, otherwise, it may result in electric shock or fire.

1.5 Maintenance

1. Method of using the environment and save the life and reliability of this product have an impact,do not work in the following environments:

A. Exceed the specfications (temperature 0℃ ~ 40℃, relative humidity 20% ~ 90%) of the high and low temperatures and wet places

B. Vibration or shocks places

C. Metallic dust, corrosive substances, salt and flammable gases

2. If the extended period of time is not used, must be UPS (without batteries) stored in a dry environment, the storage temperature range: -25℃ ~ +55℃. UPS power, you must warm up the ambient temperature above 0℃ and keep 2 hours

Chapter 2 Product introduction

2.1 Product introduction

This series of UPS is an advanced on-line uninterruptible power supply sine wave,with bypass maintenance switch and parallel redundant functions. It can provide reliable, high-quality AC power for your precision equipment. It can be widely used from computer equipment ,communication systems to industrial automation equipment. Because of its on-line design, different from the reserve-type UPS, constantly adjusting its input voltage, filter.When the utility power break off, it will have no time to break from the backup battery to provide backup power. In the case of overload or inverter failure, UPS will switch to bypass mode, the utility power supply. If the elimination of overload, UPS will automatically switch back to inverter power supply status.

Any of the above models, is divided into Standard and Professional Edition for users to choose.Professional, relative to the Standard Edition, increases EPO switch, manual maintenance bypass switch.

2.2 Model type

This series UPS model type show below.

(3) (x)K [S] [R] [X]

(3) With 3 means three phase input ,or single phase input。

(x) means capacity of ups, 1, 2, 3 for this manual product. K means capacity of UPS, KVA

[S] With S means Long backup time type , UPS can connect with external batteries. And without S means ups is standard backup time type.

[R] With R means Rack mounted, without R is Tower mounted.

[X] With X means LCD display panel and without X means LED display panel.

model	discrtption
C6K[R][X]	6KVA UPS, RACK OR TOWER, LED OR LCD, with inner batteries
C6KSR[R][X]	6KVA UPS, RACK OR TOWER, LED OR LCD, external batteries
C10K[R][X]	10KVA UPS, RACK OR TOWER, LED OR LCD, with inner batteries
C10KS[R][X]	6KVA UPS, RACK OR TOWER, LED OR LCD, external batteries
3C10KS[R][X]	10KVA UPS, RACK OR TOWER, LED OR LCD, external batteries
3C15KS[R][X]	15KVA UPS, RACK OR TOWER, LED OR LCD, external batteries
3C20KS[R][X]	20KVA UPS, RACK OR TOWER, LED OR LCD, external batteries

note：For C6KR，C10KR, battery pack needed, please refer to appendix A。

2.3 UPS appearance

2.3.1 Front panel

1 Computer Interface

2 Intelligent slot

3 Fan

4 Parallel card cover ( optional )

5 Input breaker

6 Maintain switch cover, ( Maintain switch is optional )

7 Wire terminal cover

8 Wire fix

9 EPO (Optional)

2.4 Specification

2.4.1 Electric specification

model Item		C6K	C6KS	C10K	C10KS	3C10KS	3C15KS	3C20KS
Power Rating		6KVA/4.8KW		10KVA/8KW			15KVA/12KW	20KVA/16KW
AC IN	Wire method	Single phrase or three phase & earth ground
	Rated Voltage	220VAC				380VAC
	Rated Freq	50Hz
	Voltage Range	120~275VAC±5
	Frequency Range	（45~55）±0.5Hz
	Bypass Range	80VAC×(1±5%)～285VAC×(1±5%)
BAT	Rated Bat Voltage	192VDC（Optional 240V）
	Battery capacity*Quantity	12VDC*16（Optional 20节）
AC OUT	Output system	Single phrase & earth ground
	Output voltage	220VAC±3%
	Output frequency	46-54Hz（Line normal） 50Hz±1%（Line abnormal）
	Dynamic voltage transient range	<5%
	Dynamic transient restore	< 60ms
	Waveform	Sine Wave THD<3%(linear load) Sine Wave THD<8%(nonlinear load)
	Input power factor	0.8
	Overload capability	105-125% 30s to bypass
Communications		RS232(turn to 485), Intelligent slot

2.4.2 Measurement and Weight

model	Size WHD(mm)	wight (kg)
C6KS	248×460×500	20
C10KS	248×460×500	22
C6K	248×620×500	57
C10K	248×620×500	67.5
3C10KS	248×620×500	27
3C15KS	248×620×500	35
3C20KS	248×620×500	35
C6K(S)R	438×172×500	20
C10K(S)R	438×172×500	22

2.4.3 Environmental

ITEM	Normal range
Ambient temperature	－10℃~ +40℃
Environment humidity	0~90%,no condensation
Altitude	Lower than 1000m: no derating Over 1000m :1% derating for every 100m rise
Storage temperature	-15℃~+45℃

2.4.4 EMC

ITEM	Standard	Level
ESD	IEC61000-4-2	LEVEL4
RS	IEC61000-4-3	LEVEL3
EFT	IEC61000-4-4	LEVEL4
SURGE	IEC61000-4-5	LEVEL4

济南UPS电源已经在各大企业中得到广泛使用，成为企业供电的新宠。下面来介绍一下济南UPS电源的优势及应用范围。

济南UPS电源非常稳定，对日常的用电起到保障作用。能在企业停电时及时的提供充足的电源，尤其是现在企业用电非常多，机房面积紧张，导致企业用电非常紧张，而UPS电源可以为企业源源不断的提供充足的电量，给企业带来大量的经济效益。企业完全可以放心使用。大大提高了UPS 供电系统的可靠性。

济南UPS电源绿色环保，高效节能。在全球能源供应紧张的情况下，节能环保已成为UPS 厂商进行产品技术创新的重要原则。UPS电源采用绿色供电的方式，散发出的电力不会对人体产生任何伤害。是国家极力提倡的绿色供电方式。UPS电源不仅能改善UPS 对电网的负载特性，而且还可以减少电网带来的严重污染。对其他网络设备的干扰也能最大程度的降低。大量的减少了企业的负载能力。

济南UPS电源使用寿命长，而且容易清理易维护。电源储存电量的能力非常强，只要正确使用，就可以降低UPS系统的故障率，使用寿命会不断延长。在日常清理时，只需用干抹布进行擦拭即可，就可以保持主机的亮丽如新。

济南UPS电源已经凭着诸多优势被广泛应用在航天、工业、国防、通讯等行业中，以及铁路、交通、核电站等行业也得到广泛应用。已经成为各大企业供电的合作伙伴，市场前景非常广泛。

山特UPS电源英文版说明书