▲山东鸿盛红外线烤漆房【点击查看发货案例】（869人感兴趣）

1. 红外线热源体的质量

1 the quality of infrared heat source body

买一台红外线电加热设备，不可能去拆开辐射器看内部构造，看了也未必看得明白，所以要了解一下技术参数中，辐射器的功率，关键是看承诺的使用的寿命是多长时间，非正规厂出的或低略的产品在这方面模糊。

Buy a infrared electric heating equipment, won't be able to see the internal structure of radiator apart, see also may not see, so to understand the technical parameters, the key is to use the power of the radiator, see the promises of the life is long, informal or slightly lower plant products in this fuzzy.

2. 红外线热源体的保护

2 infrared heat source body protection

红外线辐射器在工作的时候，在产生光辐射的同时红外线辐射器外壳体也会产生热，怎样能将这些热量尽快的排除掉，是保护红外线热源体使用寿命的关键，所以要了解一下固定辐射器装置的散热情况的合理性。

Infrared radiator at work, generate heat in the light radiation and infrared radiator shell will, how can the heat as soon as possible to rule out, is the key to protect the infrared heat source body life, so to understand the rationality of heat radiator fixed device.

3.红外线热源体在烤漆房或炉体内的布局

The layout of the 3 infrared heat source body in the baking room or stove.

要了解辐射器在烤漆房或炉体内的合理布局，看是不是将被烘烤的物体尽可能的被辐射到，还有它们之间的距离，辐射器与被烘烤的物体之间的距离过大，干燥效果会差;过小，有可能会将不耐高温的物件烤坏，最佳的距离是800—1200mm。

To understand the radiator in a reasonable layout of the furnace body or paint room, see is not will be baked objects as much as possible by radiation, and the distance between them, between the radiator and the baked object distance is too large, the drying effect will be poor; too small, may be not high temperature baked objects bad, the best distance is 800 1200mm.

4. 红外线热源体装置的安全性

4 infrared heat source body device security

⑴红外线辐射器在工作的时候，正面的温度高达几百度，易燃物品，纸张靠近会在几秒钟内引起燃烧(已有多起案例)，所以红外线热源体装置上一定有可靠的防护装置，以保证安全。实际上作为热源装置就因该有保护措施。

The infrared radiator at work, positive temperature up to several hundred degrees, flammable items, paper close to cause burning in a few seconds (many cases), so the infrared heat source body device must have a reliable protection device, in order to ensure safety. In fact, as a heat source device due to the protective measures.

⑵红外线辐射器的连接线一定要是匹配的耐高温线，线与线之间的连接点一定要缠紧涮锡，保证接点不能虚。

The connecting line must be infrared radiator, high temperature wire, a connection point between the line and the line must be tightened up rinse tin, ensuring contact can not be empty.

⑶红外线热源体装置一定要安装地线，确保使用安全。

The infrared heat source body device must be installed in the ground, to ensure safe use.

⑷控制柜内一定要使用合格的漏电、过载等电器。

The control cabinet must use a qualified electrical leakage, overload etc..

5.价格不是评判一种产品质量的唯一标准，但价格过低，就应该有问题了，因为企业要赚取利润，维持其正常运营，没有利润企业怎样生存，所以价格在一定的合理范围内是正常的。

5 the price is not the only standard to judge a product quality, but the price is too low, it should be a problem, because the enterprise must make a profit, to maintain the normal operation, how to survive without profit, so the price is normal in a reasonable scope.

6.售后服务也很重要，尽量找本地有可靠的售后服务队伍的企业产品，因为该类产品属电气类，出现问题售后服务人员到达时间快慢至关重要。

6 after-sales service is also very important, as far as possible to find a reliable after-sales service team of enterprise products, because the product is a kind of electrical, there is a problem after service personnel arrival time is very important.

     ▲山东鸿盛红外线烤漆房【点击查看发货案例】（968人感兴趣）

山东鸿盛集团有限公司给您的承诺：