简要说明：ECON-4 牌的科迈控制器ECON-4 ┃ECON-4价格找腾舟产品：估价：56，规格：ECON-4 ，产品系列编号：ECON-4

科迈控制器ECON-4 ┃ECON-4价格找腾舟

ECON-4 Name Function
序号 名称 说明
1 启机 启机条件满足时，打开压缩空气电磁阀
2 停机 输出科迈控制器ECON-4停机信号给停机继电器，切断调速器电源
3 紧急停机 输出停机信号给停机继电器，切断调速器电源；同时接通紧急停机电磁阀
4 远程启停机 在自动模式时接到远程启停机开关量信号进行控制
5 Lambda控制器 科迈控制器ECON-4机组转速达到50rpm（可设定）与系统接到停机信号之间，Lambda传感器输入信号有效，在此过程中控制器接收到Lambda传感器低电平信号则输出控制信号到补气电磁阀，补气最长时间不能超过10S（可设定），科迈控制器ECON-4超过10秒断掉补气电磁阀输出信号并发出Lambda故障信号
6 同步分/合闸输出 分合闸信号控制主断路器分合闸，分合闸信号为脉冲信号。同时接收分合闸反馈信号
7 手动调速调压 科迈控制器ECON-4端子排上提供手动调压、调速接点（不在调速控制器和发电机端子上面接线，转接到端子排，端子排采用单层接线端子）。

Hint:科迈控制器ECON-4
Following ECON-4 CAN setting is necessary to communicate with InteliSys NT:
- CAN mode (Object number 10338) = 1 sets ComAp protocol
- CAN NODE-ID (Object number10306) = 88 (decimal) sets address of the module
Connection rules
CAN bus line must be科迈控制器ECON-4 connected in series, from one unit to the next (no star, no cable stubs, and no
branches) both ends must be by the 120-ohm (internal or external) resistor terminated. Maximal CAN
bus length is 200 meters.
ECON-4 contains internal 120-ohm resistor, connected through a removable jumper P7.
Data Binary inputs
Following data from ECON-4 can be used for 科迈控制器ECON-4states