| 详细介绍： RMP600RMP600 is the latest generation compact radio transmission probe usingstrain gage technology. Measuring only 63?mm in diameter and 76?mmin length, with an omni-directional
transmission distance of 15?m, it isideal for use on all machine tools. RMP600 features an integrated probemodule delivering exceptional robustness and generous overtravel.It delivers interference-
free transmission through the use of FHSS(frequency hopping spread spectrum). RMP600 complies with FCCregulations and operates in the 2.4?GHz range.RMP600 supports three methods of probe
activation:Radio-on The probe is turned on via an RF signal produced by the RMI and initiated by an M code. The probe is turned off via an RF signal or the internal timer.Spin-on The
probe is turned on via an internal centrifugal switch. The probe is turned off via the centrifugal switch or the internal timer. Machine tool probesSwitch-on The probe is turned on and off via a
switch incorporated into the shank, activated when the probe is loaded into the spindle.Sense directions ±X, ±Y, +Z 2-15Stylus overtravel X and Y: ±15° Z: 11 mm (0.43 in) RMP600 probe kitStylus
trigger force X and Y: 10 gfUnidirectional repeatability Z: 193 gf Includes: RMP600 probe 0.25 μm (0.00001 in) AA battery (2) Tool kitRMP600 retrofit kit Part number: A-5312-0001 : 厦门纪扬
7,000Includes: RMP600 probe RMI radio machine interface RMI radio machine interface Receiver mounting bracket Part number: A-4113-0050 : 厦门纪扬2,559 50 mm and 100 mm carbon
fiber styli Sealtite kit Receiver mounting bracket : 厦门纪扬119 Renishaw Inspection Plus software Part number: A-2033-0830 Installation and application supportA shank is not included in
this kit. See section entitled Shanks and Sealtite conduitToolholders for and part number information. 5/16 in conduit, 1?m long. Includes one fitting.Part number: RMP600-NS-S (Available at a
fixed ) Part number: A-4113-0306 : 厦门纪扬27 Call for detailsNote: The retrofit questionnaire at the end of this section must be filled RMP600 upgrade kitout and returned to Renishaw
before a retrofit order can be processed. Current users of MP14, MP16 or MP18 radio probesRMP600 hardware only kit may upgrade to RMP600. A complete working system (MP3 probe, transmission
system, MI14 or MI16Includes: RMP600 probe interface and RMM antennas) must be exchanged. RMI radio machine interface Receiver mounting bracket Includes: RMP600 probe 50 mm
and 100 mm carbon fiber styli RMI radio machine interface Sealtite kit Receiver mounting bracket Sealtite kitPart number: RMP600-NS-KIT : 厦门纪扬10,032 Part number: RI-5312-0001
: 厦门纪扬6,440
Shanks and Toolholders Shanks for OMP40, OMP400 and RMP40 Part number Descrtption Shanks for OMP60, MP11, MP700, M-4071-0050 CAT30 厦门纪扬413 RMP60 and
RMP600 (spin-on, 厦门纪扬368 optical-on, radio-on) systems M-4071-0058 CAT40 厦门纪扬368 厦门纪扬425 M-4071-0072 CAT50 厦门纪扬368 厦门纪扬368 M-4071-0049 BT30
厦门纪扬413 厦门纪扬395 Part number Descrtption M-4071-0057 BT40 厦门纪扬482 厦门纪扬482 M-2045-0068 CAT30 厦门纪扬368 M-4071-0071 BT50 厦门纪扬482 厦门
纪扬368 厦门纪扬482 M-2045-0069 CAT40 厦门纪扬818 M-4071-0048 ISO30 DIN69871 厦门纪扬482 厦门纪扬368 厦门纪扬649 M-2045-0138 CAT45 厦门纪扬1,700 M-4071-0069 ISO40
DIN69871 厦门纪扬568 厦门纪扬368 厦门纪扬791 M-2045-0071 CAT50 厦门纪扬368 M-4071-0044 HSK E25 厦门纪扬822 厦门纪扬368 厦门纪扬822 M-2045-0292 CAT60 厦门纪扬
368 M-4071-0055 HSK E32 厦门纪扬822 厦门纪扬693 M-2045-0077 BT30 厦门纪扬826 M-4071-0054 HSK E40 厦门纪扬887 M-2045-0027 BT40 厦门纪扬1,074 M-4071-0045 HSK
A32 厦门纪扬1,077 M-2045-0038 BT45 厦门纪扬218 M-4071-0046 HSK A40 厦门纪扬218Machine tool probes M-2045-0073 BT50 厦门纪扬218 M-4071-0047 HSK A50 厦门纪扬750 M-
2045-0186 HSK A40 厦门纪扬995 M-4071-0129 HSK A63 厦门纪扬676 M-2045-0187 HSK A50 厦门纪扬1,672 M-4071-0141 CAPTO C4 厦门纪扬1,388 M-2045-0188 HSK A63 厦门纪扬
1,388 M-4071-0066 CAPTO C5 M-2045-0189 HSK A80 M-4071-0067 CAPTO C6 M-2045-0190 HSK A100 M-4071-0065 KM63 2-16 A-2045-0243
? in straight shank A-2030-0252 1 in straight shank OMP40, OMP400 and RMP40 shank kits A-2030-0211 25 mm straight shank M-2045-0313 CAPTO C4 CAT40 shank kit
M-2045-0346 CAPTO C5 Includes: CAT40 shank OMP60/RMP60 shank adaptor M-2045-0310 CAPTO C6 Part number: M-4071-0058-RI M-2045-0311 CAPTO C8
M-2045-0335 KM63 M-2045-1831591 KM63Y (Mazak) : 厦门纪扬539 Calibration masters BT40 shank kit Calibration tools Includes: BT40 shank OMP60/RMP60 shank adaptor Part number
Descrtption : 厦门纪扬539 Part number: M-4071-0057-RI 厦门纪扬431 M-2253-0954 CAT40 厦门纪扬539 Shanks for OLP40 and RLP40 M-2253-0955 CAT50 厦门纪扬697 M-2253-1562
BT30 厦门纪扬431 Part number Descrtption M-2253-1263 BT40 厦门纪扬539 M-2253-1262 BT50 A-5625-1003 25 mm straight shank 厦门纪扬218 A-5625-1004
? in straight shank 厦门纪扬218 A-5625-1007 1 in straight shank 厦门纪扬218
Tool setting probes for machining centersNC3 tool setterNC3 is a non-contact tool setter, available in a fixed configurationand offered in a single size. NC3 is compact and designed toaccommodate
tools up to 80?mm diameter making it ideal forsmall to medium machining centers and special applications.Repeatability ±0.15 μm (0.000006 in)Tool diameter Min: 0.20 mm (0.008 in) Measurement
Max: 80 mm (3.15 in) Off-center 100 mm (3.94 in) Breakage Min: 0.10 mm (0.0039 in)NC3 fixed system kit Machine tool probesIncludes: NC3 fixed unit with 10 m integral cable 2-17 NCi-5
interface Air regulator kit ?17 mm OD × 4 m conduit Mounting platePart number: A-4179-1100 : 厦门纪扬4,531NC3 fixed unit only NC3 air regulator kitIncludes: NC3 fixed unit with 10 m
integral cable Part number: A-4179-1600 : 厦门纪扬443Part number: A-4179-1500 : 厦门纪扬3,631 NC3 air filter service kit Part number: P-FI01-S002 NC3 fixed system retrofit kit : 厦门纪扬147NC3
retrofit kit includes all items above plus the following: Steel sheath conduit Tool setting software ?17 mm OD × 1 m length, for cable protection. Installation and application supportPart number: NC3
-F135-S : Call for details Part number: P-HO01-0008 : 厦门纪扬23NCi-5 interface 45° mounting bracketPart number: A-5259-2000 : 厦门纪扬226 Part number: A-4179-1501 : 厦门纪扬97 NC3
air nozzle kit Part number: A-4179-0450 : 厦门纪扬81
NC4 tool setter NC4 fixed kits NC4 is a non-contact tool setter and our most compact design. NC4 F300/225 with NCi-5 kit NC4 is available in fixed or separate configurations. NC4F (fixed) is available
in four different sizes. NC4S (separate) systems are Separation 225 mm user-configurable operating between 500?mm and 5?m. Part number: NC4-F300-Modular-kit : 厦门纪扬4,781
Repeatability ±1.0 μm (0.00004 in) Minimum tool Measurement 0.03 mm (0.0012 in) NC4 F300/240 with NCi-5 kit diameter Breakage 0.03 mm (0.0012 in) Separation 240 mm Part number: NC4-F300-
kit NC4 fixed system retrofit kits : 厦门纪扬4,781 Include: NC4 fixed unit with 12.5 m cable NC4 F230/170 with NCi-5 kit NCi-5 interface Air regulator kit Separation 170 mm ?22?mm OD steel
braided conduitMachine tool probes Mounting plate Part number: NC4-F230-kit : 厦门纪扬4,781 Tool setting software Installation and application support NC4 F145/85 with NCi-5 kit Part
numbers: NC4-F300-Modular-S * Separation 85 mm : 厦门纪扬4,781 NC4-F300-S * Part number: NC4-F145-kit NC4-F230-S *2-18 NC4-F145-S * NC4 F115/55 with NCi-5 kit NC4-F115-S * NC4-F95-S
* Separation 55 mm : 厦门纪扬4,781 Part number: NC4-F115-kit NC4 separate system retrofit kits NC4 F95/23 with NCi-5 kit Include: NC4 separate unit with 12.5 m cable Separation 23 mm :
厦门纪扬4,781 NCi-5 interface Part number: NC4-F95-kit Air regulator kit ?17?mm OD steel braided conduit NC4 separate kits Tool setting software Installation and application support NC4 S800 with
NCi-5 kit Part numbers: NC4-S800-S * Separation 500 mm – 800 mm : 厦门纪扬4,747 NC4-S1500-S * Part number: A-4114-5060 : 厦门纪扬4,747 NC4-S2000-S * : 厦门纪扬4,747 NC4-S3000-S * NC4
S1500 with NCi-5 kit : 厦门纪扬4,747 NC4-S5000-S * : 厦门纪扬4,747 Separation 800 mm – 1500 mm Note: When ordering a separate system retrofit kit, the customer Part number: A-4114-5065 must
select an NC4 based on its operating range. In addition, the customer must select tool setting software based on the NC4 S2000 with NCi-5 kit control type. Brackets and an adjusting method (see
following page) are also needed for NC4 separate systems. These Separation 1500 mm – 2000 mm are not included with NC4 separate systems and must be Part number: A-4114-5070 ordered
additionally. Mounting brackets for various machines are continually developed. Contact Renishaw for the latest list NC4 S3000 with NCi-5 kit of compatibility. Bracket installation is not included with
the standard separate system retrofit , this service can be Separation 2000 mm – 3000 mm quoted upon request. Part number: A-4114-5075 * Available at a fixed . Call for details. NC4 S5000 with
NCi-5 kit Separation 3000 mm – 5000 mm Part number: A-4114-5080
NC4 tool kit : 厦门纪扬43 Steel sheath conduit 22 mm OD × 1 mPart number: A-4114-4110 : 厦门纪扬443NC4 air regulator kit : 厦门纪扬147 For NC4 fixed cable protection.Part number: A-2253-5120 : 厦
门纪扬226NC4 air filter service kit Part number: P-HO01-0011 : 厦门纪扬23Part number: P-FI01-S002 : 厦门纪扬22NCi-5 interface : 厦门纪扬22 Steel sheath conduit 17 mm OD × 1 mPart number: A-5259
-2000 : 厦门纪扬22NC4 access panel 0.2 For NC4 separate cable protection.Part number: A-4114-0082NC4 access panel 0.4 Part number: P-HO01-0008 : 厦门纪扬23Part number: A-4114-0084NC4 access
panel 0.6 NC4F 90-degree cable exit kitPart number: A-4114-0086 Part number: P-CA61-0068 : 厦门纪扬22 Part number: P-CA61-0069 : 厦门纪扬22 NC4F air blast nozzle and bracket Machine tool
probes Part number: A-5450-0480 : 厦门纪扬305 Solenoid kit : 厦门纪扬850 2-19 Part number: A-5450-0490NC4 set-up tool : 厦门纪扬342Part number: A-4114-8000NC4S mounting hardware options1.
NC4 spacer plate – separate 2Part number: A-4114-4400 : 厦门纪扬1022. NC4 adjuster pack – separate 1Part number: A-4114-3100 : 厦门纪扬228
OTS The OTS is a new optical transmission tool setter for vertical and OTS ?AA horizontal machining centers. Modeled on the TS27R, OTS can set tool length and diameter of rotating tools and
perform broken tool detection. OTS is available in two configurations – OTS ?AA and OTS AA. OTS can be used with the OMI?2, OMI?2T or OMM-2/OSI interface. OMI-2T or OMM-2/OSI must be used
if OTS is to be paired with another optical transmission probe. Sense directions ±X, ±Y, +Z X and Y: ±10° Stylus overtravel Z: 5.5 mm (0.21 in) 130 gf – 240 gf Stylus trigger force 1.0 μm (0.00004 in)
Unidirectional repeatabilityMachine tool probes OTS retrofit kit OTS AA2-20 Includes: OTS ?AA or OTS AA probe OMM-2 optical receiver OMI-2T Receiver mounting bracket Part number: A-5492-0051
: 厦门纪扬986 Sealtite kit Renishaw tool setting software OMI-2 optical receiver Installation and application support Part number: A-5191-0049 : 厦门纪扬1,582 Part number: OTS-S (?AA configuration)
Part number: OTSAA-S (AA configuration) Available at fixed – call for details. Note: The retrofit questionnaire at the end of this section must be filled out and returned to Renishaw before a retrofit
order can be processed. OTS hardware only kit OMI-2T optical receiver Includes: OTS ?AA probe or OTS AA probe Part number: A-5439-0049 : 厦门纪扬1,582 OMI-2T Receiver mounting
bracket Receiver mounting bracket Sealtite kit Part number: A-2033-0830 : 厦门纪扬119 Part number: OTS-KIT : 厦门纪扬4,053 Part number: OTSAA-KIT : 厦门纪扬4,053 OTS ?AA probe kit
OSI interface Includes: OTS probe Part number: A-5492-2000 : 厦门纪扬931 ? AA battery (2) Tool kit Sealtite conduit for OMM-2, OMI-2 or OMI-2T Part number: A-5401-2001 : 厦门纪扬2,271
5/16 in conduit, 1 m long. Includes one fitting. OTS AA probe kit Part number: A-4113-0306 : 厦门纪扬27 Includes: OTS probe AA battery (2) Tool kit Part number: A-5514-2001 : 厦门纪
扬2,271
|
放大图片
