帮我筛选一下液下渣浆泵叶轮A迁西液下渣浆泵叶轮

一般来说,即使顺式含量最高的聚合物在这一温度下也会结晶.顺丁这种低温下所具有的较高弹性及抗硬化性能,使其与天然橡胶或丁苯橡胶并用肘,能改善它们的低温性能.滞后损失和生热小 由于高顺式丁二烯橡胶分子链段的运动所需要克服周围分子链的阻力和作用力小,内摩擦小,当作用于分子的外力去掉后,顺丁橡胶接头分子能较快的回复至原状,因此滞后损失小,生热小。

一、产品概述SP液下渣浆泵为立式离心液下渣浆泵，浸入液下，用于输送磨蚀性、粗颗粒、高浓度渣浆。不需要任何轴封和轴封水，在吸入量不足的工况下也能正常工作。

SP型液下渣浆泵过流部件由耐磨金属制成。 

根据渣浆池液面的高低，可选择不同长度的泵传动轴或吸入管。 

采用多种速度和多种变型方式，使得泵在最佳工况下运行，使用寿命长，运行效益高，能满足多类恶劣的输送条件。 

Second, SP liquid slurry pump application Range 
Slurry pump is mainly suitable for conveying corrosive, coarse particles, high concentration slag slurry. Widely used in metallurgy, mining, coal, electricity, building materials, environmental protection and other departments.
Third, SP liquid slag slurry pump structure description 
The difference between the slurry pump structure of SPR liquid and the slurry pump under SP liquid is only that the parts of the dipping slag slurry are lined with corrosion-resistant rubber, the parts lined with rubber include shafts, pumps, impellers, protective plates and filters, and the connecting bolts in the lower part of the immersion liquid are equipped with rubber protective sleeves, and the transmission parts and SP pumps
SP Liquid slurry pump pump body, impeller guard plate are made of wear-resistant materials. The pump end of the bearing body adopts a double row tapered roller bearing, and the driving end adopts a single row cylindrical roller bearing, which can withstand the maximum axial load of the pump. The bearing body is fitted with a motor seat or motor bracket, which can be driven by a direct or triangle belt drive. The pump should be immersed in the slurry pool to work, the pump body suction inlet with a filter, can prevent large particles into the human pump. Jdhuiquan5.15
Four, the depth of the liquid can be extended pump self-belt liquid depth of about 70cm, according to customer requirements to increase the depth of the liquid, (the price with the addition of a long number of meters and different) please customers and customer service personnel in advance to explain.

帮我筛选一下液下渣浆泵叶轮A迁西液下渣浆泵叶轮

4，拆下中部支架，拉下联轴器。5，拆下轴承体上下轴承盖，即可检讨轴承状况。二，液下泵的起动，泊车和工作需要1，液下泵电机在未设备前，应接通电源检讨改变偏向，必需与泵的规矩改变偏向一致2，液下泵装上电机，渣浆泵报价盘动联轴器，检讨泵轴与电机能否同心，改变能否轻重不匀，正常后再工作。

五、型号意义

    40 PV-SP

   40----------吐出口径40mm

   PV--------- PV型轴承组件

   SP----------液下泵

水泵安装

 泵安装的好坏对泵的运行和寿命冇重要影响，所以安装和校正必须仔细进行。泵的外形及安装尺寸。