ULTEM ? Resin 2210EPR

PEI 基础创新塑料（美国）2210EPR

ULTEM 2210EPR

20%玻璃纤维填充,高流量Polyetherimide(Tg 217 c)与内部脱模和增强electroplatability。符合弗吉尼亚州ECO，阻燃UL94-V0和5VA 。注射成型。

典型属性：

MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 5 mm/min	1400	kgf/cm2	ASTM D 638
Tensile Stress, brk, Type I, 5 mm/min	1400	kgf/cm2	ASTM D 638
Tensile Strain, yld, Type I, 5 mm/min	3	%	ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min	3	%	ASTM D 638
Tensile Modulus, 5 mm/min	70300	kgf/cm2	ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	2100	kgf/cm2	ASTM D 790
Flexural Stress, brk, 2.6 mm/min, 100 mm span	2100	kgf/cm2	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span	70300	kgf/cm2	ASTM D 790
Flexural Modulus, 2.6 mm/min, 100 mm span	70300	kgf/cm2	ASTM D 790
IMPACT	Value	Unit	Standard
Izod Impact, unnotched, 23°C	59	cm-kgf/cm	ASTM D 4812
Izod Impact, notched, 23°C	8	cm-kgf/cm	ASTM D 256
Instrumented Impact Total Energy, 23°C	152	cm-kgf	ASTM D 3763
THERMAL	Value	Unit	Standard
Vicat Softening Temp, Rate B/50	210	°C	ASTM D 1525
HDT, 0.45 MPa, 3.2 mm, unannealed	211	°C	ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed	206	°C	ASTM D 648
HDT, 0.45 MPa, 6.4 mm, unannealed	213	°C	ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed	208	°C	ASTM D 648
CTE, -40°C to 40°C, flow	3.6E-05	1/°C	ASTM E 831
CTE, -40°C to 40°C, xflow	7.2E-05	1/°C	ASTM E 831
Relative Temp Index, Elec	105	°C	UL 746B
Relative Temp Index, Mech w/impact	105	°C	UL 746B
Relative Temp Index, Mech w/o impact	105	°C	UL 746B
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.39	-	ASTM D 792
Mold Shrinkage, flow, 3.2 mm (5)	0.5 - 0.7	%	SABIC Method
Mold Shrinkage, xflow, 3.2 mm (5)	0.5 - 0.7	%	SABIC Method
Melt Flow Rate, 337°C/6.6 kgf	13	g/10 min	ASTM D 1238
ELECTRICAL	Value	Unit	Standard
Arc Resistance, Tungsten {PLC}	6	PLC Code	ASTM D 495
Hot Wire Ignition {PLC)	1	PLC Code	UL 746A
High Voltage Arc Track Rate {PLC}	3	PLC Code	UL 746A
High Ampere Arc Ign, surface {PLC}	3	PLC Code	UL 746A
Comparative Tracking Index (UL) {PLC}	4	PLC Code	UL 746A
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Recognized, 94V-0 Flame Class Rating (3)	0.4	mm	UL 94

来源：东莞鸿图工程塑胶

免责声明：汽配名企网转载作品均注明出处，本网未注明出处和转载的，是出于传递更多信息之目的，并不意味着赞同其观点或证实其内容的真实性。如转载作品侵犯作者署名权，或有其他诸如版权、肖像权、知识产权等方面的伤害，并非本网故意为之，在接到相关权利人通知后将立即加以更正。联系电话：0571－87774297。